Overview

Robust, for industrial applications
DS NET hardware has been designed for demanding measurements, as found in today`s most industrial measuring and test environments. The range of applications starts with a single stand-alone system, and ranges all the way up to networked dozens to hundreds of channels, in the fields of component testing, engine testing, process performance testing and structural monitoring.

A wide range of available DS-NET modules allows optimized solutions for single task applications, such as dynamic signal acquisition up to 10 kS/s, inputs/outputs for all types of signals, galvanic isolation of the inputs and outputs, and high channel count per system.

Bullet-proof
The programmable intelligence in each module allows the calculation of minima, maxima, data reduction and filtering in each module already. The data buffer memory inside the interface module of 12 MByte guarantees a gap-free data acquisition. This intelligence allows to optimize the data rate for each application.

Black Line and Rack Line versions
DEWETRON DS-NET Hardware is offered in two platforms:

• The "Black line" (shown and discussed here) is designed for portable and field applications. Each acquisition block can be configured from 1 to 16 acquisition modules (4 to 128 analog channels) depending on the module type.
• The "Rack Line" (DS-IP-19) is a 19’’ rack solution designed for fixed high channel count applications. These systems are typically installed in 19” rack cabinets. If this is what you are looking for, please check out the DS-IP-19 "Rack line" version.

Module choices and flexibility
A wide range of available modules allows optimized solutions for single task applications, such as dynamic signal acquisition up to 10 kS/s, inputs/outputs for all types of signals, galvanic isolation of the inputs and outputs, and high channel count per system. Modules are available with high density screw terminal connectors, or with DSUB or BNC connectors, depending on the module. With the screw terminal connectors, you can wire up your leads to the mate, and just plug it in. If you change modules, just unplug the mate, replace the module, and plug the mate back in! No re-wiring!


Combined dynamic and DS-NET systems!
Yes, you can combine classical Dewetron DYNAMIC measuring systems with DS-NET solutions - as you saw on the architecture drawing. What a stunning combination, providing you the best of both worlds! Ethernet bridges the worlds, and allows incredibly distributed systems like never before possible from Dewetron!

Reliability

The programmable intelligence in each module allows the calculation of minima, maxima, data reduction and filtering in each module already. The data buffer memory inside the interface module of 12 MByte guarantees a gap-free data acquisition. This intelligence allows to optimize the data rate for each application.


Real-time performance when you really need it
The Microsoft® Windows operating system can never guarantee reaction within a certain time. Whenever there are guaranteed output or alarm functions required, DS NET modules offer you the perfect solution. Even PID control loops are possible with the optional controller module.



Hot swap capability
Modules can be replaced during measurement without pre-programming. Setup is loaded from the modules’ backplane.

Housings

The Black Line housing can be freely configured for 1 to 16 measurement slots. The modules are inserted from the front side. Modules can be replaced anytime - even during measurement! - and each module can be different, or all the same. There are modules with up to 8 channels each! Combine these multi-function modules in countless ways, providing top notch data recording AND process control. DS NET modules are intelligent, and contain the setup that is downloaded from your easy setup within our award winning DEWESoft software, for maximum reliability and deterministic control.



Want to go large?
If you prefer a large scale rack-mounting version of these products, check out the DS-IP-19 "Rack line" version.

Modules

Jump to the MODULE PAGE

Software

Most data acquisition software packages allow you to display and record data from A/D cards, to control signal conditioners, and record data to RAM or disk. Of course, DEWESoft handles all that easily - but that’s just the beginning. Imagine if you could plug all these addition devices into your data acquisition system, and add them to your recordings in perfect sync:

• Video cameras - from inexpensive webcams to fast synchronizable cameras, even high speed video cameras, infra-red, and low light cameras
• GPS sensors - record your exact position, heading, speed and distance, and draw a real-time map as you move around
• CAN BUS interfaces - view and record dozens - even hundreds of parameters - directly from the CAN bus that is built into every car, truck, motorcycle, most aircraft engines, modern trains, and thousands of CAN based sensors!
• ARINC 429 aircraft data bus, from countless commercial aircraft
• MIL-STD 1553 aircraft data bus, from military aircraft of all kinds

Well, DEWESoft makes all that possible -- and more! Learn more about DEWESoft.

Expansion via LabVIEW
One of the best features of DEWESoft is that you can use it as a powerful software "engine," where it will effortlessly control all of the hardware in the entire Dewetron data acquisition system... then you can program in a tool like LabVIEW from National Instruments. This allows you to create complete closed-loop systems, including hardware-in-the-loop systems and ATP - automated test procedures. Using the openly available library of COM and D/COM function calls, you can control hundreds of DEWESoft functions at the lowest level, creating your own application for any purpose.