..
DEWE-3210
Our best portable data acquisition system
Dewetron, Inc.
10 High Street, Ste K
Wakefield, RI 02879-3144
Tel: +1 401-284-3750
Fax: +1 401-284-3755
Our most popular portable instrument ever, the DEWE-3210 SureHAND provides hot-swappable batteries and a big touchscreen display to a killer data acquisition unit. Grab and go convenience combined with high-end signal conditioning and A/D cards, plus the best software in the industry.
Other systems stop at voltages, but that's where we start. Then we add VIDEO, AUDIO, CAN BUS, ARINC 429, 1553, GPS -- even high-end inertial sensors for 2 cm position accuracy Infra-red cameras? RADAR object detectors? That's the Dewetron difference.
Other systems stop at voltages, but that's where we start. Then we add VIDEO, AUDIO, CAN BUS, ARINC 429, 1553, GPS -- even high-end inertial sensors for 2 cm position accuracy Infra-red cameras? RADAR object detectors? That's the Dewetron difference.
- SideHAND battery power system - runs for hours without any power connected
- Hot-swappable batteries
- Available in three versions: 8 x DAQ modules, 16 x MDAQ channels, or 8 x DEWE-43 channels built-in
- 17" flip-up touchscreen standard
- Removable 500 GB HDD standard
The DEWE-3210 series is available in three basic versions, depending on what kind of signal conditioning you would like to have:
- With 8 slots for our plug-in ISOLATION modules. This model is ideal when you want to handle high voltages, or require high inter-channel isolation. Plus this is the only version in which the conditioners are hot-swappable.
- With 16 DIFFERENTIAL amplifiers, when isolation is not needed. Each MDAQ-SUB provides 8 high-performance channels, and is factory installed.
- With 8 FLEXIBLE inputs and 200 kS/s 24-bit ADCs. Just add some MSI-BR adapters to plug into the channels to allow them to do just about anything.
Top Applications
DEWE-3211 version, with the screen lid closed, and the battery door open -- one battery partially removed
Expandable, extensible architecture
All versions of this model can be expanded to more and more channels.
The version with 8 x DAQ/HSI modules on the left side panel has another 8 A/D channels on a connector, allowing you to easily connect one of our external signal conditioning blocks.
All versions can have additional A/D cards added for expansion up to 96 dynamic channels, and 256 static/slow channels.
All versions of this model can be expanded to more and more channels.
The version with 8 x DAQ/HSI modules on the left side panel has another 8 A/D channels on a connector, allowing you to easily connect one of our external signal conditioning blocks.
All versions can have additional A/D cards added for expansion up to 96 dynamic channels, and 256 static/slow channels.
SideHAND hot-swappable batteries
Runs for 2-3 hours without any external power connected. The batteries are hot-swappable!
Front panel conveniences
STORE/STOP buttons and battery indicator LCD are located just above the splash-proof keyboard and touchpad.
17" touchscreen display
Use your finger to zoom in on the data, or press buttons on the screen. It's so easy.
Easy access signal conditioners
The DAQ or MDAQ inputs are located on the left side panel, which is available in many different configurations.
All of the conveniences
Splash-proof keyboard and touchpad improve reliability
Removable HDD and solid state HDD
The right side features the removable HDD and the computer connections behind a protective metal door
DEWE-3210
- 8 slots for DAQ / HSI modules
- Portable, battery powered
- 17" touchscreen display
- Choose any A/D card
- Choose DS-7 version
DEWE-3213
- 8 versatile inputs + 8 counters + 2 CAN BUS
- Portable, battery powered
- 17" touchscreen display
- Includes DS-7-SE version
- Ready to go - perhaps add some MSI adapters
DEWE-3211
- 16 x MDAQ channels
- Portable, battery powered
- 17" touchscreen display
- Choose any A/D card
- Choose DS-7 version
Computer specs:
Core2Duo 2 GHz Intel processor, 2 GB RAM
Windows 7 Professional OS (32-bit)
Removable HDD with 500 GB drive for data
Separate internal 160 GB drive for the operating system
Additional drives, removal of the internal drive, or solid state drives, optionally available
2 x ethernet, 4 x USB 2.0, IEEE-1394 (Firewire), A/V I/O, VGA output
17" XGA 1280x1024 px
Touchscreen standard in this model
DCD+-CD-RW internal drive being phased out in early 2012
Power Specs
SIDEHAND power system with hot swappable batteries, runs for 2-3 hours without any power.
DPS-2410 external AC/DC power supply/charger is included. Runs from 120/240 VAC power 50/60 Hz
Three battery slots are provided.
Two hot-swappable BATT-95WH batteries are included.
Mechanical Specs
Size: 425 x 340 x 191 mm (16.7 x 13.4 x 7.5 in.)
Weight: 10 kg (22 lbs) without batteries
Environmental Specs
Temp: 0 ~ +50 °C (-20 when pre-warmed)
Humidity: 10 ~ 80 % non cond., 5 to 95 % RH
Shock: EN 60068-2-27, MIL-STD-810F
Vibration: EN 60068-2-6, EN 60721-3-2 class 2M2
Core2Duo 2 GHz Intel processor, 2 GB RAM
Windows 7 Professional OS (32-bit)
Removable HDD with 500 GB drive for data
Separate internal 160 GB drive for the operating system
Additional drives, removal of the internal drive, or solid state drives, optionally available
2 x ethernet, 4 x USB 2.0, IEEE-1394 (Firewire), A/V I/O, VGA output
17" XGA 1280x1024 px
Touchscreen standard in this model
DCD+-CD-RW internal drive being phased out in early 2012
Power Specs
SIDEHAND power system with hot swappable batteries, runs for 2-3 hours without any power.
DPS-2410 external AC/DC power supply/charger is included. Runs from 120/240 VAC power 50/60 Hz
Three battery slots are provided.
Two hot-swappable BATT-95WH batteries are included.
Mechanical Specs
Size: 425 x 340 x 191 mm (16.7 x 13.4 x 7.5 in.)
Weight: 10 kg (22 lbs) without batteries
Environmental Specs
Temp: 0 ~ +50 °C (-20 when pre-warmed)
Humidity: 10 ~ 80 % non cond., 5 to 95 % RH
Shock: EN 60068-2-27, MIL-STD-810F
Vibration: EN 60068-2-6, EN 60721-3-2 class 2M2
DEWE-3213 version
Analog input specs
8 simultaneously sampled inputs
24-bit resolution sigma-delta ADC/channel
204.8 kS/s/ch max sample rate
Bandwidth: 76 kHz @ 204.8 kS/s
Input types: differential, not isolated
Over voltage protection: ±70 V
Signal Conditioning specs:
Direct voltage measurement ranges:
±0.01 V, ±0.1 V, ±1 V, ±10 V
Voltage measurement using MSI-BR-V200:
up to ±200 V
Direct full bridge measurement:
±10 mV/V, ±100 mV/V, ±1000 mV/V
Bridge measurement via ext. completion:
1/4 and 1/2 bridge @ 120 Ω or 350 Ω
IEPE measurement via MSI-BR-ACC:
±0.1 V, ±1 V, ±10 V, incl. 4~8 mA excitation
Charge measurement via MSI-BR-CHA-50:
Thermocouple measurement via MSI-BR-TH:
Types J, K, or T (full range of sensor)
RTD measurement via MSI-BR-RTD:
Compatibility: Pt100, Pt200, Pt500, Pt1000, Pt2000 and resistance
-200°C to 1000°C and 0 to 6.5 kΩ
Software specs
DS-7 is included and installed as standard.
Link to the software page
CAN interfaces (standard):
2 x CAN bus interfaces
Protocol: CAN 2.0B, up to 1 MBaud
Physical layer: high speed
SYNC interface (standard):
4-pin LEMO connector with sync capability to DEWE-43, DS-NET, SIRIUS models
IRIG interface:
DC IRIG (demodulated) via the SYNC connector (requires latest firmware)
AC IRIG (modulated) requires a small demodulator box connected to the SYNC connector, or the IRIG-CLOCK-INT option to be installed.
Analog input specs
8 simultaneously sampled inputs
24-bit resolution sigma-delta ADC/channel
204.8 kS/s/ch max sample rate
Bandwidth: 76 kHz @ 204.8 kS/s
Input types: differential, not isolated
Over voltage protection: ±70 V
Signal Conditioning specs:
Direct voltage measurement ranges:
±0.01 V, ±0.1 V, ±1 V, ±10 V
Voltage measurement using MSI-BR-V200:
up to ±200 V
Direct full bridge measurement:
±10 mV/V, ±100 mV/V, ±1000 mV/V
Bridge measurement via ext. completion:
1/4 and 1/2 bridge @ 120 Ω or 350 Ω
IEPE measurement via MSI-BR-ACC:
±0.1 V, ±1 V, ±10 V, incl. 4~8 mA excitation
Charge measurement via MSI-BR-CHA-50:
Thermocouple measurement via MSI-BR-TH:
Types J, K, or T (full range of sensor)
RTD measurement via MSI-BR-RTD:
Compatibility: Pt100, Pt200, Pt500, Pt1000, Pt2000 and resistance
-200°C to 1000°C and 0 to 6.5 kΩ
Software specs
DS-7 is included and installed as standard.
Link to the software page
CAN interfaces (standard):
2 x CAN bus interfaces
Protocol: CAN 2.0B, up to 1 MBaud
Physical layer: high speed
SYNC interface (standard):
4-pin LEMO connector with sync capability to DEWE-43, DS-NET, SIRIUS models
IRIG interface:
DC IRIG (demodulated) via the SYNC connector (requires latest firmware)
AC IRIG (modulated) requires a small demodulator box connected to the SYNC connector, or the IRIG-CLOCK-INT option to be installed.
DEWE-3210 and DEWE-3211 versions
Analog input specs
According to the selected A/D card(s). See those specifications for complete details.
Link to the A/D card page
Signal Conditioning specs:
According to the selected signal conditioner(s). See those specifications for complete details.
Link to the signal conditioners page
Software specs
According to the selected software (typically DS-7).
Link to the software page
Interface specs
According to the selected interfaces (CAN BUS, ARINC, 1553...).
Link to the interfaces page
Accessories included:
Soft carrying bag with pouches and straps
DPS-2410 AC/DC adapter and cables
Printed Owner's Guide (300 pages)
Analog input specs
According to the selected A/D card(s). See those specifications for complete details.
Link to the A/D card page
Signal Conditioning specs:
According to the selected signal conditioner(s). See those specifications for complete details.
Link to the signal conditioners page
Software specs
According to the selected software (typically DS-7).
Link to the software page
Interface specs
According to the selected interfaces (CAN BUS, ARINC, 1553...).
Link to the interfaces page
Accessories included:
Soft carrying bag with pouches and straps
DPS-2410 AC/DC adapter and cables
Printed Owner's Guide (300 pages)
ORION series A/D cards
Simultaneous sampling Dewetron ORION cards are at the heart of every Dewetron data acquisition system, providing the TIMING BACKBONE that allows us to record so many disparate data sources in perfect sync with each other. Each ORION card provides not only analog inputs, but digital inputs and digital I/O lines, and synchronous counter/encoders. In addition, they can be upgraded to have more digital/encoder lines, as well as two synchronous CAN BUS interfaces.
Key Features
Key Features
- Simultaneous sampling
- Separate ADC on each channel
- 16, 22, and 24 bit resolution
- Sigma delta or successive approximation ADC chips
- Synchronous counter/encoder inputs and digital I/O lines
- Optional CAN BUS interfaces
- Optional counter expansion and SUPER counter expansion in most cards
16-bit ORION cards
ORION 16-bit cards are available in several channel counts and maximum sample rates, up to 1 MS/s/ch.
ORION-1616-100: 16 channels @ 100 kS/s/ch
ORION-1616-500: 16 channels @ 500 kS/s/ch
ORION-1616-1000: 16 channels @ 1000 kS/s
ORION-3216-100: 32 channels @ 100 kS/s/ch
ORION-0816-1000: 8 channels @ 1000 kS/s
ORION-1616-100: 16 channels @ 100 kS/s/ch
ORION-1616-500: 16 channels @ 500 kS/s/ch
ORION-1616-1000: 16 channels @ 1000 kS/s
ORION-3216-100: 32 channels @ 100 kS/s/ch
ORION-0816-1000: 8 channels @ 1000 kS/s
24-bit ORION cards
ORION 24-bit cards are ideal for dynamic signal applications, and sample rates up to 200 kS/s/ch with automatic anti-aliasing filtering.
ORION-0424-200: 4 channels @ 200 kS/s
ORION-0824-200: 8 channels @ 200 kS/s/ch
ORION-1624-200: 16 channels @ 200 kS/s
ORION-0424-200: 4 channels @ 200 kS/s
ORION-0824-200: 8 channels @ 200 kS/s/ch
ORION-1624-200: 16 channels @ 200 kS/s
22-bit ORION cards
A little less expensive than 24-bit, but still high performance, 22-bit cards are available up to 32 channels and 100 kS/s/ch with automatic anti-aliasing filtering.
ORION-1622-100: 16 channels @ 100 kS/s
ORION-3222-100: 32 channels @ 100 kS/s/ch
ORION-1622-100: 16 channels @ 100 kS/s
ORION-3222-100: 32 channels @ 100 kS/s/ch
Brochures
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
Manuals
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
DAQ series ISOLATED plugin modules
ISOLATED, MEDIUM BANDWIDTH (up to 300 kHz), HOT-SWAPPABLE... Choose from universal, strain, high voltage (±1400V), low voltage (±10 mV), temperature, F/V, IEPE...
Key Features
- High isolation up to 1.8 kVRMS
- High bandwidth up to 700 kHz
- ±5 V conditioned signal output
- Easy to exchange, hot-swappable
High voltage
DAQP-HV and HV-S3
DAQP-HV and HV-S3
Low voltage
DAQP-LV
DAQP-LV
Strain / universal (300 kHz bandwidth)
DAQP-STG
DAQP-STG
Current
DAQP-LA and -LA-B-S1
DAQP-LA and -LA-B-S1
Isolated high voltage input module
300 kHz bandwidth (optionally 700 kHz)
±20 to ±1400V ranges
1.8 kVRMS line to line isolation
1.4 kVRMS line to ground isolation
Optional screw terminal connectors for permanent installation
Hot-swappable plug-in module with conditioned ±5 V output
300 kHz bandwidth (optionally 700 kHz)
±20 to ±1400V ranges
1.8 kVRMS line to line isolation
1.4 kVRMS line to ground isolation
Optional screw terminal connectors for permanent installation
Hot-swappable plug-in module with conditioned ±5 V output
Isolated low voltage input module
300 kHz bandwidth
±10mV to ±50V ranges
AC/DC coupling
Isolation: 1 kV (banana) or 350 VDC
4-20 mA and ±5A via external shunts
Banana, BNC, LEMO, DSUB, or screw
Hot-swappable plug-in module with conditioned ±5 V output
300 kHz bandwidth
±10mV to ±50V ranges
AC/DC coupling
Isolation: 1 kV (banana) or 350 VDC
4-20 mA and ±5A via external shunts
Banana, BNC, LEMO, DSUB, or screw
Hot-swappable plug-in module with conditioned ±5 V output
Isolated universal input module
300 kHz bandwidth
350 V isolation
Handles Strain gage and bridge sensors (constant voltage excitation), Piezoresistive bridge sensors (constant current excitation), Voltage up to ±10 V, RTDs (Pt100 to Pt2000), Resistance
Additional sensors via MSI
300 kHz bandwidth
350 V isolation
Handles Strain gage and bridge sensors (constant voltage excitation), Piezoresistive bridge sensors (constant current excitation), Voltage up to ±10 V, RTDs (Pt100 to Pt2000), Resistance
Additional sensors via MSI
Isolated low current input module
300 kHz bandwidth
1.4 kVRMS Input to ground
0.1 A, 0.3 A, 1 A, 3 A, 10 A peak, 30 A peak, DAQP-LA-B-S1: 2 mA, 6 mA, 20 mA, 60 mA, 200 mA, 0.6 A
Screw terminals or banana jacks
300 kHz bandwidth
1.4 kVRMS Input to ground
0.1 A, 0.3 A, 1 A, 3 A, 10 A peak, 30 A peak, DAQP-LA-B-S1: 2 mA, 6 mA, 20 mA, 60 mA, 200 mA, 0.6 A
Screw terminals or banana jacks
IEPE accelerometers
DAQP-ACC-A
DAQP-ACC-A
IEPE module with sensor supply
300 kHz bandwidth
±50 mV to ±5 V input
4 mA or 8 mA excitation current
Hot-swappable plug-in module with conditioned ±5 V output
300 kHz bandwidth
±50 mV to ±5 V input
4 mA or 8 mA excitation current
Hot-swappable plug-in module with conditioned ±5 V output
Frequency to voltage
DAQP-FREQ-A
DAQP-FREQ-A
Frequency to voltage module
Additional conditioned TTL output
Ranges up to 200 kHz
Input and output filters
Auto trigger level detection (or manual)
Isolation: ±350 V
Hot-swappable plug-in module with conditioned ±5 V output
Additional conditioned TTL output
Ranges up to 200 kHz
Input and output filters
Auto trigger level detection (or manual)
Isolation: ±350 V
Hot-swappable plug-in module with conditioned ±5 V output
Universal (3 kHz b/w)
DAQP-MULTI
DAQP-MULTI
Isolated universal input module
3 kHz bandwidth
1000 V isolation
Any thermocouple, internal linearization Also RTD (Pt100, Pt200, Pt500, Pt1000 and Pt2000 sensors), resistance from 1Ω to 1 MΩ, Bridge input: constant current powered 4-wire full bridge sensors, 13 ranges from ±0.5 to 5000 mV/mA, Voltage 10 ranges from ±5 mV to ± 5 V
Hot-swappable plug-in module with conditioned ±5 V output
3 kHz bandwidth
1000 V isolation
Any thermocouple, internal linearization Also RTD (Pt100, Pt200, Pt500, Pt1000 and Pt2000 sensors), resistance from 1Ω to 1 MΩ, Bridge input: constant current powered 4-wire full bridge sensors, 13 ranges from ±0.5 to 5000 mV/mA, Voltage 10 ranges from ±5 mV to ± 5 V
Hot-swappable plug-in module with conditioned ±5 V output
Thermocouple (3 kHz b/w)
DAQP-THERM
DAQP-THERM
Any thermocouple (K, J, T, R, S, N, E, B, L, C, U)
Freely programmable range
Internal linearization, ±5 V linear output
High-speed, 3 kHz bandwidth
High Isolation, ±1000 Vrms continuous
Universal thermocouple MINI input connector
Hot-swappable plug-in modules with conditioned linear ±5V output
Freely programmable range
Internal linearization, ±5 V linear output
High-speed, 3 kHz bandwidth
High Isolation, ±1000 Vrms continuous
Universal thermocouple MINI input connector
Hot-swappable plug-in modules with conditioned linear ±5V output
MDAQ Series DIFFERENTIAL Signal Conditioners
DIFFERENTIAL, MEDIUM BANDWIDTH (up to 300 kHz), HOT-SWAPPABLE... Choose from IEPE, universal, strain, voltage (±200V)...
Key Features
Key Features
- 8 channel SUB blocks can be mixed and matched
- Bandwidth up to 300 kHz
- ±5 V conditioned signal output
- Factory installed only
Our most popular MDAQ modules:
Voltage
MDAQ-SUB-V-200-BNC and -D
MDAQ-SUB-V-200-BNC and -D
DIFFERENTIAL voltage input card
300 kHz bandwidth
BNC inputs standard
Optional DSUB connectors for sensor power access, TEDS, and MSI-V support
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
300 kHz bandwidth
BNC inputs standard
Optional DSUB connectors for sensor power access, TEDS, and MSI-V support
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
IEPE / low voltage
MDAQ-SUB-ACC and -ACC-A
MDAQ-SUB-ACC and -ACC-A
DIFFERENTIAL IEPE / low voltage input card
300 kHz bandwidth
Two versions, providing choice of SE/DIFF modes, AC/DC coupling, one or two HP filters
Choice of connector types: BNC or microdot
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
300 kHz bandwidth
Two versions, providing choice of SE/DIFF modes, AC/DC coupling, one or two HP filters
Choice of connector types: BNC or microdot
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
Bridge / low voltage
MDAQ-SUB-BRIDGE
MDAQ-SUB-BRIDGE
DIFFERENTIAL bridge / low-voltage input card
30 kHz bandwidth
Natively handles Strain gauge; full, half bridge,Voltage up to ±10 V
Additional signal inputs using DEWETRON Modular Smart Interfaces (MSI): IEPE accelerometers or microphones, Thermocouple sensors, Charge sensors, Voltage up to ±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
30 kHz bandwidth
Natively handles Strain gauge; full, half bridge,Voltage up to ±10 V
Additional signal inputs using DEWETRON Modular Smart Interfaces (MSI): IEPE accelerometers or microphones, Thermocouple sensors, Charge sensors, Voltage up to ±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
Strain / universal
MDAQ-SUB-STG
MDAQ-SUB-STG
DIFFERENTIAL universal input card
30 kHz bandwidth
DIFFERENTIAL inputs
Natively handles Strain gauge; full, half and quarter bridge incl. shunt calibration, Voltage up to ±10 V
Additional signal inputs using MSI: IEPE accels, thermocouples, charge sensors, and±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
30 kHz bandwidth
DIFFERENTIAL inputs
Natively handles Strain gauge; full, half and quarter bridge incl. shunt calibration, Voltage up to ±10 V
Additional signal inputs using MSI: IEPE accels, thermocouples, charge sensors, and±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
Popular MDAQ filter add-on options
2 pole filter, Butterworth
MDAQ-FILT-5-BU
MDAQ-FILT-5-BU
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
2 pole filter, Butterworth
MDAQ-FILT-5-BU-S1
MDAQ-FILT-5-BU-S1
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass (700 kHz)
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass (700 kHz)
2 pole filter, Bessel
MDAQ-FILT-5-BE
MDAQ-FILT-5-BE
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Bessel filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
Filter settings independent on each channel
Bessel filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
4 pole, Butterworth
MDAQ-FILT-AAF4-5-BU
MDAQ-FILT-AAF4-5-BU
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass
4 pole, Butterworth
MDAQ-FILT-AAF4-5-BU-S1
MDAQ-FILT-AAF4-5-BU-S1
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
163 Hz, 500 Hz, 2.5 kHz, 10 kHz and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
163 Hz, 500 Hz, 2.5 kHz, 10 kHz and bypass
4 pole, Bessel
MDAQ-FILT-AAF4-5-BEU-S1
MDAQ-FILT-AAF4-5-BEU-S1
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 20 kHz, 30 kHz and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 20 kHz, 30 kHz and bypass
4 pole, Butterworth
MDAQ-FILT-AAF4-5-BU-S2
MDAQ-FILT-AAF4-5-BU-S2
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
10 Hz, 100 Hz, 1 kHz, 10 kHz, 20 kHz and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
10 Hz, 100 Hz, 1 kHz, 10 kHz, 20 kHz and bypass
Popular MDAQ filter add-on options
MSI series Multiple Sensor Interface adapters
MSI adapters are intended to extend the capabilities of certain Dewetron signal conditioners, allowing them to handle additional signal types and sensors.
Key Features
Key Features
- Adaptors for IEPE, charge, RTD, thermocouples, 200 Volts...
- Compatible with numerous Dewetron signal conditioners and systems like DEWE-43, DEWE-101, etc.
- Automatic MSI identification when plugged in
- Easy to exchange, hot-swappable
- No bandwidth limitation
MSI-BR modules for BRIDGE inputs (MDAQ-SUB-BRIDGE, MDAQ-SUB-STG, DAQP-STG, DAQP-BRIDGE-B, DEWE-43, DEWE-101 Minitaur, SIRIUS STG amplifier...
MSI-BR-ACC
Constant current accelerometer smart adapter
Excitation current 4 mA, 21 V,
high pass filter 1.5 Hz, bandwidth and ranges are defined by connected amplifier, automatic MSI identification within DS-7 software
MSI-BR-V200
200 Volt input smart adapter
Differential input configuration, BNC connector, automatic MSI identification within DS-7 software
Differential input configuration, BNC connector, automatic MSI identification within DS-7 software
MSI-BR-TH (J, K, T, C)
Thermocouple smart adapter
High accuracy cold junction reference measurement,
1 m thermo cable with Mini TC connector, automatic MSI identification within DS-7 software
High accuracy cold junction reference measurement,
1 m thermo cable with Mini TC connector, automatic MSI identification within DS-7 software
MSI-BR-RTD
Pt100, Pt200, Pt500 and Pt1000 smart adapter, 2, 3 and 4 wire connection methods, 5-pin Binder 712 series connector, automatic MSI identification within DS-7 software
MSI-BR-CHA-50
Charge sensor smart adapter, range up to 50000 pC, AC coupled with 0.08 Hz, BNC connection,
max. 45 kHz bandwidth, automatic MSI identification within DS-7 software
MSI-V modules for V inputs (MDAQ-SUB-V-200-D, DAQP-LV-D, DAQP-V-A-D, DAQP-V-B-D…
MSI-V-ACC
Constant current accelerometer smart adapter
Excitation current 4 mA, 21 V,
high pass filter 1.5 Hz, bandwidth and ranges are defined by connected amplifier, automatic MSI identification within DS-7 software
MSI-V-RTD
Pt100, Pt200, Pt500 and Pt1000 smart adapter, 2, 3 and 4 wire connection methods, 5-pin Binder 712 series connector, automatic MSI identification within DS-7 software
MSI-V-CH-50
Charge sensor smart adapter, range up to 50000 pC, AC coupled with 0.08 Hz, BNC connection,
max. 45 kHz bandwidth, automatic MSI identification within DS-7 software
BATT-95WH
Additional lithium-ion smart battery for the 43-BELTPACK
ADAPTERS for other input types
These are passive interfaces that allow you to adapt the DEWE-43 inputs to a different input types, such as 4-20 mA and strain gages that require completion, or which simply adapt the DB9 connector to a different type.
These are passive interfaces that allow you to adapt the DEWE-43 inputs to a different input types, such as 4-20 mA and strain gages that require completion, or which simply adapt the DB9 connector to a different type.
ADAP-CONN-DSUB-9
Mating 9-pin DSUB connector with screw terminals inside, for easy hook-up without any soldering or de-soldering.
ADAP-MDAQ-BNCF
9-pin DSUB to BNC connector adapter, with impedance matching resistor inside.
ADAP-SHUNT-20MA
Shunt adapter, 50 Ω, 0.1%, 1 W. For 0-20 mA signals. BNC input connector
DEWE-3210 Resources
There are a variety of things that you can download here, including the PDF product brochure and manual. The third link will take you to another page where you can download DS-7 software and related resources.
There are a variety of things that you can download here, including the PDF product brochure and manual. The third link will take you to another page where you can download DS-7 software and related resources.
