..
DEWE-1201
Our smallest all-in-one data acquisition system
Dewetron, Inc.
10 High Street, Ste K
Wakefield, RI 02879-3144
Tel: +1 401-284-3750
Fax: +1 401-284-3755
Even smaller than the DEWE-3210 series, the DEWE-1201 is made for vehicle testing, when you need a big built-in display and battery power that keeps the system running for hours. With 16 flexible MDAQ input channels, 2 counters, and two optional CAN BUS interfaces -- the DEWE-1201 is a fantastic data acquisition instrument at a great price/performance ratio.
A popular option for the DEWE-1201 is an attachable battery pack that allows you to run the system for more than an hour without any power connected.
A popular option for the DEWE-1201 is an attachable battery pack that allows you to run the system for more than an hour without any power connected.
- 16 dynamic input channels
- Accepts any ORION series A/D card for top performance
- Optional CAN BUS interfaces
- Runs from wide range DC power
- Optional battery pack
- Optional expansion chassis for 32 total channels
E-X-P-A-N-D-A-B-I-L-I-T-Y
The DEWE-1201 can even be expanded to double its channel count from 16 to 32. The attachable expansion box adds room for another ORION A/D card and 16 more MDAQ input channels, 2 more CAN BUS interfaces, and more counters and digital inputs.
The DEWE-1201 can even be expanded to double its channel count from 16 to 32. The attachable expansion box adds room for another ORION A/D card and 16 more MDAQ input channels, 2 more CAN BUS interfaces, and more counters and digital inputs.
Top Applications
- Vehicle test - perfect for in the car tests
- Industry test - Factory floor applications
- Noise and vibe test - with MDAQ-ACC conditioners
Built-in keyboard and touchpad
Ethernet and WIFI built-in
13" flat panel display
These are built in just below the display, just like a notebook computer has.
Regular ethernet is built in as well as a standard WIFI connector and antenna.
Use your finger to zoom in on the data, or press buttons on the screen (touchscreen is an option).
Choice of 2 models
The standard model accepts any ORION card and any two MDAQ-SUB conditioners, for a total of 16 dynamic inputs channels and up to 2 CAN BUS interfaces.
The expanded model accepts an additional ORION card and two more MDAQ-SUB conditioners for a total of 32 dynamic input channels. In addition, the number of CAN buses can be doubled to four, and more counters and digital inputs can be added.
The standard model accepts any ORION card and any two MDAQ-SUB conditioners, for a total of 16 dynamic inputs channels and up to 2 CAN BUS interfaces.
The expanded model accepts an additional ORION card and two more MDAQ-SUB conditioners for a total of 32 dynamic input channels. In addition, the number of CAN buses can be doubled to four, and more counters and digital inputs can be added.
DEWE-1201-32
Upgraded model:
- With the optional expansion block, the number of channels is doubled.
- The battery pack is available for both the standard and expanded model
DEWE-1201
Standard model:
- Configurable model
- 32 GB flash HDD, WLAN
- 13" TFT 1280x800 px
- Core2Duo @ 2 GHz, 2 GB RAM
- Choose any ORION A/D card
- Choose any 2 MDAQ-SUB modules
- Add DEWESoft software
- Add any interfaces you need
Computer specs:
Core2Duo 2 GHz Intel processor, 2 GB RAM
32 GB solid state HDD standard
Windows 7 Professional OS (32-bit)
Internal solid state HDD, 32 GB
1 x ethernet, 2 x USB 2.0, A/V I/O, VGA output
13" XGA 1280x800 px display
Power Specs
8-30 VDC max input
Includes AC/DC adapter for lab use
Optional isolated DC-DC adapter available
Core2Duo 2 GHz Intel processor, 2 GB RAM
32 GB solid state HDD standard
Windows 7 Professional OS (32-bit)
Internal solid state HDD, 32 GB
1 x ethernet, 2 x USB 2.0, A/V I/O, VGA output
13" XGA 1280x800 px display
Power Specs
8-30 VDC max input
Includes AC/DC adapter for lab use
Optional isolated DC-DC adapter available
Mechanical Specs
Size: 317 x 252 x 110 mm (12.5 x 9.9 x 4.3 in.)
317 x 252 x 145 mm (12.5 x 9.9 x 5.7 in.) with optional battery-pack
Weight: 5.5 kg (12.1 lb)
Environmental Specs
Temp: 0 ~ +50 °C (-20 when pre-warmed)
Humidity: 10 ~ 80 % non cond., 5 to 95 % RH
Shock: EN 60068-2-27, MIL-STD-810F
Vibration: EN 60068-2-6, EN 60721-3-2 class 2M2
Size: 317 x 252 x 110 mm (12.5 x 9.9 x 4.3 in.)
317 x 252 x 145 mm (12.5 x 9.9 x 5.7 in.) with optional battery-pack
Weight: 5.5 kg (12.1 lb)
Environmental Specs
Temp: 0 ~ +50 °C (-20 when pre-warmed)
Humidity: 10 ~ 80 % non cond., 5 to 95 % RH
Shock: EN 60068-2-27, MIL-STD-810F
Vibration: EN 60068-2-6, EN 60721-3-2 class 2M2
Analog input specs
According to the selected ORION series A/D card. See those specifications for complete details.
Signal Conditioning specs:
According to the selected MDAQ series signal conditioner(s). See those specifications for complete details.
Software specs
According to version of DEWESoft installed. See DEWESoft specifications for complete details.
Accessories included:
Soft carrying bag
AC/DC adapter and cables
Manual
According to the selected ORION series A/D card. See those specifications for complete details.
Signal Conditioning specs:
According to the selected MDAQ series signal conditioner(s). See those specifications for complete details.
Software specs
According to version of DEWESoft installed. See DEWESoft specifications for complete details.
Accessories included:
Soft carrying bag
AC/DC adapter and cables
Manual
ORION series A/D cards
Simultaneous sampling Dewetron ORION cards are at the heart of every Dewetron data acquisition system, providing the TIMING BACKBONE that allows us to record so many disparate data sources in perfect sync with each other. Each ORION card provides not only analog inputs, but digital inputs and digital I/O lines, and synchronous counter/encoders. In addition, they can be upgraded to have more digital/encoder lines, as well as two synchronous CAN BUS interfaces.
Key Features
Key Features
- Simultaneous sampling
- Separate ADC on each channel
- 16, 22, and 24 bit resolution
- Sigma delta or successive approximation ADC chips
- Synchronous counter/encoder inputs and digital I/O lines
- Optional CAN BUS interfaces
- Optional counter expansion and SUPER counter expansion in most cards
16-bit ORION cards
ORION 16-bit cards are available in several channel counts and maximum sample rates, up to 1 MS/s/ch.
ORION-1616-100: 16 channels @ 100 kS/s/ch
ORION-1616-500: 16 channels @ 500 kS/s/ch
ORION-1616-1000: 16 channels @ 1000 kS/s
ORION-3216-100: 32 channels @ 100 kS/s/ch
ORION-0816-1000: 8 channels @ 1000 kS/s
ORION-1616-100: 16 channels @ 100 kS/s/ch
ORION-1616-500: 16 channels @ 500 kS/s/ch
ORION-1616-1000: 16 channels @ 1000 kS/s
ORION-3216-100: 32 channels @ 100 kS/s/ch
ORION-0816-1000: 8 channels @ 1000 kS/s
24-bit ORION cards
ORION 24-bit cards are ideal for dynamic signal applications, and sample rates up to 200 kS/s/ch with automatic anti-aliasing filtering.
ORION-0424-200: 4 channels @ 200 kS/s
ORION-0824-200: 8 channels @ 200 kS/s/ch
ORION-1624-200: 16 channels @ 200 kS/s
ORION-0424-200: 4 channels @ 200 kS/s
ORION-0824-200: 8 channels @ 200 kS/s/ch
ORION-1624-200: 16 channels @ 200 kS/s
22-bit ORION cards
A little less expensive than 24-bit, but still high performance, 22-bit cards are available up to 32 channels and 100 kS/s/ch with automatic anti-aliasing filtering.
ORION-1622-100: 16 channels @ 100 kS/s
ORION-3222-100: 32 channels @ 100 kS/s/ch
ORION-1622-100: 16 channels @ 100 kS/s
ORION-3222-100: 32 channels @ 100 kS/s/ch
Brochures
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
PDF file, 1 MB
Manuals
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
PDF file, 5 MB
MDAQ Series DIFFERENTIAL Signal Conditioners
DIFFERENTIAL, MEDIUM BANDWIDTH (up to 300 kHz), HOT-SWAPPABLE... Choose from IEPE, universal, strain, voltage (±200V)...
Key Features
Key Features
- 8 channel SUB blocks can be mixed and matched
- Bandwidth up to 300 kHz
- ±5 V conditioned signal output
- Factory installed only
Our most popular MDAQ modules:
Voltage
MDAQ-SUB-V-200-BNC and -D
MDAQ-SUB-V-200-BNC and -D
DIFFERENTIAL voltage input card
300 kHz bandwidth
BNC inputs standard
Optional DSUB connectors for sensor power access, TEDS, and MSI-V support
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
300 kHz bandwidth
BNC inputs standard
Optional DSUB connectors for sensor power access, TEDS, and MSI-V support
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
IEPE / low voltage
MDAQ-SUB-ACC and -ACC-A
MDAQ-SUB-ACC and -ACC-A
DIFFERENTIAL IEPE / low voltage input card
300 kHz bandwidth
Two versions, providing choice of SE/DIFF modes, AC/DC coupling, one or two HP filters
Choice of connector types: BNC or microdot
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
300 kHz bandwidth
Two versions, providing choice of SE/DIFF modes, AC/DC coupling, one or two HP filters
Choice of connector types: BNC or microdot
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
Bridge / low voltage
MDAQ-SUB-BRIDGE
MDAQ-SUB-BRIDGE
DIFFERENTIAL bridge / low-voltage input card
30 kHz bandwidth
Natively handles Strain gauge; full, half bridge,Voltage up to ±10 V
Additional signal inputs using DEWETRON Modular Smart Interfaces (MSI): IEPE accelerometers or microphones, Thermocouple sensors, Charge sensors, Voltage up to ±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
30 kHz bandwidth
Natively handles Strain gauge; full, half bridge,Voltage up to ±10 V
Additional signal inputs using DEWETRON Modular Smart Interfaces (MSI): IEPE accelerometers or microphones, Thermocouple sensors, Charge sensors, Voltage up to ±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
Strain / universal
MDAQ-SUB-STG
MDAQ-SUB-STG
DIFFERENTIAL universal input card
30 kHz bandwidth
DIFFERENTIAL inputs
Natively handles Strain gauge; full, half and quarter bridge incl. shunt calibration, Voltage up to ±10 V
Additional signal inputs using MSI: IEPE accels, thermocouples, charge sensors, and±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
30 kHz bandwidth
DIFFERENTIAL inputs
Natively handles Strain gauge; full, half and quarter bridge incl. shunt calibration, Voltage up to ±10 V
Additional signal inputs using MSI: IEPE accels, thermocouples, charge sensors, and±200 V
Factory installed module with conditioned ±5 V output
Completely controlled within DS-7 software
Popular MDAQ filter add-on options
2 pole filter, Butterworth
MDAQ-FILT-5-BU
MDAQ-FILT-5-BU
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
2 pole filter, Butterworth
MDAQ-FILT-5-BU-S1
MDAQ-FILT-5-BU-S1
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass (700 kHz)
Filter settings independent on each channel
Butterworth filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass (700 kHz)
2 pole filter, Bessel
MDAQ-FILT-5-BE
MDAQ-FILT-5-BE
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Bessel filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
Filter settings independent on each channel
Bessel filter type
2-pole roll-off
40 dB/decade (12 dB/Q)
30 Hz, 100 Hz, 300 Hz, 1 kHz, 10 kHz, and bypass (700 kHz)
4 pole, Butterworth
MDAQ-FILT-AAF4-5-BU
MDAQ-FILT-AAF4-5-BU
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 30 kHz, 100 kHz, and bypass
4 pole, Butterworth
MDAQ-FILT-AAF4-5-BU-S1
MDAQ-FILT-AAF4-5-BU-S1
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
163 Hz, 500 Hz, 2.5 kHz, 10 kHz and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
163 Hz, 500 Hz, 2.5 kHz, 10 kHz and bypass
4 pole, Bessel
MDAQ-FILT-AAF4-5-BEU-S1
MDAQ-FILT-AAF4-5-BEU-S1
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 20 kHz, 30 kHz and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
100 Hz, 1 kHz, 10 kHz, 20 kHz, 30 kHz and bypass
4 pole, Butterworth
MDAQ-FILT-AAF4-5-BU-S2
MDAQ-FILT-AAF4-5-BU-S2
16-ch filter add-on card for MDAQ-BASE
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
10 Hz, 100 Hz, 1 kHz, 10 kHz, 20 kHz and bypass
Filter settings independent on each channel
Butterworth filter type
4-pole roll-off
10 Hz, 100 Hz, 1 kHz, 10 kHz, 20 kHz and bypass
Popular MDAQ filter add-on options
MSI series Multiple Sensor Interface adapters
MSI adapters are intended to extend the capabilities of certain Dewetron signal conditioners, allowing them to handle additional signal types and sensors.
Key Features
Key Features
- Adaptors for IEPE, charge, RTD, thermocouples, 200 Volts...
- Compatible with numerous Dewetron signal conditioners and systems like DEWE-43, DEWE-101, etc.
- Automatic MSI identification when plugged in
- Easy to exchange, hot-swappable
- No bandwidth limitation
MSI-BR modules for BRIDGE inputs (MDAQ-SUB-BRIDGE, MDAQ-SUB-STG, DAQP-STG, DAQP-BRIDGE-B, DEWE-43, DEWE-101 Minitaur, SIRIUS STG amplifier...
MSI-BR-ACC
Constant current accelerometer smart adapter
Excitation current 4 mA, 21 V,
high pass filter 1.5 Hz, bandwidth and ranges are defined by connected amplifier, automatic MSI identification within DS-7 software
MSI-BR-V200
200 Volt input smart adapter
Differential input configuration, BNC connector, automatic MSI identification within DS-7 software
Differential input configuration, BNC connector, automatic MSI identification within DS-7 software
MSI-BR-TH (J, K, T, C)
Thermocouple smart adapter
High accuracy cold junction reference measurement,
1 m thermo cable with Mini TC connector, automatic MSI identification within DS-7 software
High accuracy cold junction reference measurement,
1 m thermo cable with Mini TC connector, automatic MSI identification within DS-7 software
MSI-BR-RTD
Pt100, Pt200, Pt500 and Pt1000 smart adapter, 2, 3 and 4 wire connection methods, 5-pin Binder 712 series connector, automatic MSI identification within DS-7 software
MSI-BR-CHA-50
Charge sensor smart adapter, range up to 50000 pC, AC coupled with 0.08 Hz, BNC connection,
max. 45 kHz bandwidth, automatic MSI identification within DS-7 software
MSI-V modules for V inputs (MDAQ-SUB-V-200-D, DAQP-LV-D, DAQP-V-A-D, DAQP-V-B-D…
MSI-V-ACC
Constant current accelerometer smart adapter
Excitation current 4 mA, 21 V,
high pass filter 1.5 Hz, bandwidth and ranges are defined by connected amplifier, automatic MSI identification within DS-7 software
MSI-V-RTD
Pt100, Pt200, Pt500 and Pt1000 smart adapter, 2, 3 and 4 wire connection methods, 5-pin Binder 712 series connector, automatic MSI identification within DS-7 software
MSI-V-CH-50
Charge sensor smart adapter, range up to 50000 pC, AC coupled with 0.08 Hz, BNC connection,
max. 45 kHz bandwidth, automatic MSI identification within DS-7 software
ADAPTERS for other input types
These are passive interfaces that allow you to adapt the DEWE-43 inputs to a different input types, such as 4-20 mA and strain gages that require completion, or which simply adapt the DB9 connector to a different type.
These are passive interfaces that allow you to adapt the DEWE-43 inputs to a different input types, such as 4-20 mA and strain gages that require completion, or which simply adapt the DB9 connector to a different type.
ADAP-CONN-DSUB-9
Mating 9-pin DSUB connector with screw terminals inside, for easy hook-up without any soldering or de-soldering.
ADAP-MDAQ-BNCF
9-pin DSUB to BNC connector adapter, with impedance matching resistor inside.
ADAP-SHUNT-20MA
Shunt adapter, 50 Ω, 0.1%, 1 W. For 0-20 mA signals. BNC input connector
DEWE-1201 Resources
There are a variety of things that you can download here, including the PDF product brochure and manual. The third link will take you to another page where you can download DS-7 software and related resources.
There are a variety of things that you can download here, including the PDF product brochure and manual. The third link will take you to another page where you can download DS-7 software and related resources.
PDF file, 1 MB
PDF file, 2 MB
Would you like a price quote?
Please use the form below to request pricing for the DEWE-1201 and its options. Fields with a RED LABEL are required, so please fill them out before submitting. We promise to respond quickly to each request that we get.
Please use the form below to request pricing for the DEWE-1201 and its options. Fields with a RED LABEL are required, so please fill them out before submitting. We promise to respond quickly to each request that we get.