Awesome All-in-One
Stacks Image 36498
Stacks Image 36518
Stacks Image 36542
Stacks Image 36545
Stacks Image 36548

Dewetron, Inc.
10 High Street, Ste K
Wakefield, RI 02879-3144
Tel: +1 401-284-3750
Fax: +1 401-284-3755

The DEWE-3050 series has the most flexible rear panel that we ever made, capable of countless signal conditioning configurations. It features a removable hard drive and DVD+-CD-RW drive, and a brilliant 17" touchscreen display that can be removed and placed away from the main chassis, or turned around to face in when the system is not in use.

Key Features:
  • Flexible rear panel accepts all of our conditioners
  • Can be configured with 32 DAQ modules or 128 MDAQ-BNC channels
  • 17" REMOVABLE display with standard TOUCHSCREEN
  • Standard battery power system
  • Made in USA
Stacks Image 853
Stacks Image 5406

Front, closed

Stacks Image 5396

Screen removed

Stacks Image 5372

Front, screen on

Stacks Image 5392

Right side panel

Stacks Image 31918

Left side panel


Battery Convenience
Removable Touchscreen
Flexible Conditioning
Stacks Image 354
This is the only Dewetron "all in one" model that is both battery powered AND plugs directly into AC, eliminating the need for a bulky external AC/DC adapter.
Stacks Image 1516
You don't need a keyboard for everything - just press the buttons right on the screen. Also makes zooming and un-zooming you data easier than ever
Stacks Image 586
DAQ, MDAQ, PAD, HSI, MPAD... they can all be installed on the rear panel!
Removable Display
Removable HDDs
Stacks Image 2788
You can SYNC multiple Dewetron systems together with this powerful hardware sync interface option.
Stacks Image 2793
You can remove the screen and mount it backwards for storage, or locate it a short distance from the mainframe.
Stacks Image 2798
Two removable HDDs are standard: One drive for the OS and apps, and a second drive for data (500 GB). These are the C and D drives.

Quick Look

Stacks Image 11878
Stacks Image 11880

Signal Conditioning

Dewetron signal conditioners open up the world of sensors to you. We have isolated or differential conditioners for virtually every sensor, and every signal type, used in physical measurement data acquisition applications.

But that's just the beginning. We offer signal conditioning modules and amps for all of these kinds of sensors and signals:
  • Strain gage, bridge (1/4, 1/2, and full bridge)
  • IEPE and CHARGE accelerometers
  • Capacitive accelerometers
  • Microphones of all kinds (low voltage, IEPE, charge...)
  • LVDTs and AC carrier bridge amps
  • Voltages, from millivolts to kilovolts
  • Currents, from milliamps to kiloamps (via clamps or flex coils)
  • Frequency signals
  • Resistance and potentiometer measurements
  • RTDs (many types)
  • Thermocouples (many types)
  • Thermisters
  • And more!
Stacks Image 4414
Stacks Image 3906
Isolated plug-in modules, up to 300 kHz bandwidth
Virtually all DAQ modules are ISOLATED
Plug-in convenience - you can even change them with the system is powered on
Easy to reconfigure in the field, in just minutes
Bandwidth up to 300 kHz (most modules)
Click the image to learn more.
Stacks Image 3915
Isolated plug-in modules, 2 MHz bandwidth
HSI are similar to DAQ modules, except that they have 2 MHz BANDWIDTH! There are three HSI modules: low voltage, high voltage, and our famous UNIVERSAL / STRAIN GAGE module, the HSI-STG.
They all feature ISOLATION and 2 MHz bandwidth.
Click the image to learn more.
Stacks Image 4893
Isolated plug-in modules, multi-channels, low sample rate
Isolated signal conditioning modules for SLOW signals
Internal sample rate ~ 12 Hz, output rate ~ 1 Hz
Ideal way to expand your DEWETRON system with more slow channels
Pad modules plug into the same slots as DAQ and HSI modules
Click the image to learn more.
Stacks Image 3927
Isolated external modules, multi-channels, low sample rate
Isolated external signal conditioning modules for SLOW signals
Internal sample rate ~ 12 Hz, output rate ~ 1 Hz
Ideal way to expand your DEWETRON system with more slow channels
EPAD2 have serial interface / CPAD2 have CAN BUS interface and offer higher transfer speed than the EPAD2 modules.
Click the image to learn more.
Stacks Image 4287
Differential factory-installed modules, 8-channel, up to 300 kHz bandwidth
Factory installed signal conditioning amplifiers for fast signals
Voltage and IEPE conditioners have 300 kHz bandwidth,
STG and BRIDGE have 30 kHz bandwidth
DIFFERENTIAL but not isolated high performance amplifiers
Click the image to learn more.
Stacks Image 4301
Adapt various conditioners to handle other sensor types
Multiple Sensor Interface adapters, these small devices plug into many different DEWETRON conditioners and adapt them to do more. Compatible with DAQP-STG, DAQP-BRIDGE-A, MDAQ-SUB-STG-D, MDAQ-SUB-BRIDGE-D, DAQP-LV-D, DEWE-43, DEWE-101, DEWE-3213, SIRIUS STG amplifier, and several more.
Click the image to learn more.

Channel Expansion

There are several ways to expand the number of channels of your DEWE system. Here are the most popular ways!
Channel Expansion by Analog Cable
A very popular way of expanding the analog inputs is to install more ORION cards into the instrument and connect external signal conditioning amplifiers via analog cables. Each D310 instrument has two spare PCI-slots which can be used to install additional ORION cards. Select a suitable external DEWE-30 or DEWE-31 series signal conditioning rack, the required amplifiers and directly connect the analog outputs to the ORION cards by analog signal cables.

User tip: The standard analog cable length is 2 m but these can be as long as 15 m.
Stacks Image 25321
Stacks Image 25323
Channel Expansion by TCP/IP
The NET expansion is a fantastic way to combine two or more D310 instruments to one multichannel system. Each instrument must have the hardware option UP-ORION-SYNC and the software option DS-OPT-NET. Synchronization of all units is required too. There are two synchronization methods: (1) a simple SYNC cable connection, for distances up to 200 m, or (2) DEWE-CLOCK (internal or external), for long distances when a SYNC cable connection is not possible. The DS-OPT-NET software offers full remote setup, online data transfer up to the limit of the network connection and offline data transfer between the

User tip: The NET expansion allows multiple usages of the PC power and fast storing capability. Multiple decentralized hard disks offer almost no limit for fast data storing.
Stacks Image 25332
Stacks Image 25334
Channel Expansion by PCI Bridge
The PCI expansion is an alternative especially if high channel count is needed. When using an expansion only one PCI slot is occupied in the D310 instrument by a PCI-HOST-CARD. The DEWE-50, DEWE-51 and DEWE-52 ADC racks can be connected by a 1m PCI cable. The ORION cards are installed inside the DEWE-5x unit and you simply have to select the suitable signal amplifiers for your needs.

Note: The D310 and the DEWE-5x must be equipped with ORION-SYNC option.

User tip: with an additional ECARD-34 or 54 the DEWE-5x also can be used as an independent system in combination with a laptop computer.
Stacks Image 25343
Stacks Image 25345
Channel Expansion by EPAD2 series modules
Adding low-speed channels to your DEWE system is as easy as plugging one or more EPAD2 series conditioners into the standard EPAD port.

Each EPAD2 module provides 8 isolated input channels. You can simply daisy-chain them together, up to 16 provides 128 channels!

We offer EPAD2 modules for:

Types, J, K, T and a UNIVERSAL module

RTD sensors
Pt100, Pt200, Pt500 (up to 250°C) and NI120 sensors

VOLTAGE signals
Up to ±50V

CURRENT signals
Direct current measurement of 4-20 mA current

All EPAD2 modules provide 24-bit ADCs for each channel, and sampling up to 12 S/s/ch. Output rates vary according to the quantity of EPAD channels being recorded.
Stacks Image 25354
Stacks Image 25356


Stacks Image 11888
Stacks Image 11886
Stacks Image 11893
Stacks Image 11895
Stacks Image 11897
Stacks Image 11899


Stacks Image 1090
Download the Brochure
PDF file, 9 MB
Stacks Image 7472
Download the 2012 catalog
PDF file, 1 MB
Stacks Image 762
DS-7 Software download page
Stacks Image 1093
Owners Guide
PDF file
10 MB (low resolution)
Stacks Image 17723
Owners Guide
PDF file
25 MB (med resolution)

Important Note About Manual Downloads

Most Dewetron manuals cover the chassis itself, but do not contain operational information, or details about the signal conditioners, A/D cards, or interfaces that may be installed in your system. For those we have separate manuals. Here are links to these items, where you can access those manuals from the DOWNLOADS tabs:

ORION series A/D Cards
TRION series modules
DAQ series signal conditioners
MDAQ series signal conditioners
HSI series signal conditioners
MSI series multiple sensor interfaces
EPAD2 / CPAD2 series signal conditioners

Request Pricing

Not sure what product you're looking for? Use our Parametric Search Form to find out!

Your Contact Information

DEWETRON INC. provides our products and services to North and South America, and the Carribbean. If your request is from outside this area, we will automatically forward it to our colleagues around the world so that they can assist you locally. Please note that a specialist looks at each quote request, so it takes some time. There is no "instant" quote from the website. If you need immediate help, please call us at +1 877-431-4166.
Stacks Image 1224
© 1998-2014 Dewetron, Inc. 10 High Street, Ste K, Wakefield, RI 02879 USA | Business hours Monday - Friday 08:00 - 17:00 except US and RI official holidays
Phone: +1 401-284-3750 | Toll-free USA: +1 877-431-5166 | Fax: +1 401-284-3755
For application support: support@dewamerica.com | For service issues: service@dewamerica.com | For sales topics: sales@dewamerica.com
Sign up for DEWE updates

DEWETRON itself is backed up by companies with more than $1B in assets, so we have the resources to support you. At DEWETRON, data acquisition is what we do - and it’s all we do. When you partner with us, you're in strong hands.
We design and build DATA ACQUISITION INSTRUMENTS. Our solutions are considered best of breed in the field of physical measurement from sensors like strain, acceleration, temperature, force and many more. Our SYNC CLOCK technology allows additional data from a wide variety of interfaces (VIDEO, ARINC, 1553, GPS, CAN, IRIG…) to be recorded in perfect sync with the analog and digital data.
All trademarks and copyrights are acknowledged as the properties of their owners.
Stacks Image 16034